AT-VM95C/H Headshell MM Cartridge Combo Kit

The AT-VM95C/H combo kit includes the AT-VM95C dual moving magnet cartridge premounted on the AT-HS6BK headshell. Features Conical Bonded Stylus Aluminum Cantilever Dual Moving Magnet Design Durable Low-Resonance Housing VM95 Series The VM95 Series cartridge with 0.6 mil conical stylus fits half-inch mount turntables. The cartridges special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws no nuts required. And since all VM95 Series share the same body the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli. What s in the Box AT-VM95C/H Headshell MM Cartridge Combo Kit Installation Hardware Specifications Frequency Response: 20-20000 Hz Channel Separation: 18 (dB at 1 kHz) Vertical Tracking Angle: 23 Vertical Tracking Force: 1.8-2.2 g (2.0 g standard) Stylus Construction: Bonded round shank Recommended Load Impedance: 47000 ohms Coil Impedance: 3.3 k ohms (1 kHz) DC Resistance: 485 ohms Coil Inductance: 550 mH (1 kHz) Output Voltage: 4.0 mV (1 kHz 5 cm/sec.) Output Channel Balance: 2.5 dB (1 kHz) Stylus Shape: 0.6 mil conical Cantilever: Aluminum pipe Static Compliance: 17 x 10 6 cm / dyne Dynamic Compliance: 6.5 x 10 6 cm / dyne (100 Hz) Mounting: Half-inch Dimensions (Cartridge Headshell): 0.84" x 0.83" 2.46" Model: AT-VM95C/H Mounting Feature: Half-inch mount Recommended Load Capacitance: 100 to 200 pF Replacement Stylus: AT-VMN95C Stylus Size: 0.6 mil Type: VM Stereo Dual Magnet Weight (Cartridge Headshell): 15.5 g (0.55 oz) Wire Used for Coil: T.P. Copper