1 of 12

Peter Gentenaar
Paper sculpture by Gentenaar
2018

$17,946.52List Price

About the Item

The Memory of Paper My inspiration is a plant bud, which, in spring, unfolds into a leaf. A compact folded form feeds itself with water and turns into a great spacious form. In autumn, this leaf falls off of the tree, the water evaporates and a small web of fibers curling around the spine is the new form. Peter Gentenaar Iris van Herpen presented her latest Couture collection, titled ‘Ludi Naturae’ in a collaboration with Peter Gentenaar, January, 2018, at the Galerie de Mineralogie et de Geologie, in Paris. Peter created a site specific ‘floating installation that blossoms around the garments as the models move’. This was another totally different direction to take Peter’s paper sculptures but was a wonderful combination of organic designed clothing on models sailing through the paper lined catwalk. In 2009, Peter was asked to decorate the Abbey Church in Saint Riquier, Somme, France, for the classical music festival held in this flamboyant gothic church. It formed the perfect backdrop for more than eighty paper sculptures hung in this exposition. The photos on the web and Peter’s web-site aroused international interest. In 2012, the Yas Mall in Abu Dhabi ordered 60 sculptures to decorate the mall’s Pearl and Luxury Courts. In the same year, a commission for a 30-meter-long toreador’s cape was made for the Four Seasons Hotel in the Capa Roof top restaurant, Disney Resort in Orlando, Florida USA. Both commissions were completed in 2014. His 1st Russian location is Hotel Indigo in Saint Petersburg, that purchased a group of flying sculptures for the atrium, in 2013. He then caught the attention of the designers for Suzhou Center, China, who ordered 44 hanging sculptures, to decorate the atrium of their new mall, which opened in 2017. The blue and white marbled ‘clouds’ with triangular golden ‘sails’ titled ‘Windsurfers in a Porcelain Sea’ were 1st shown in Jinji Lake Art Museum, with extra pieces from Peter and Pat He has created works for 2 cruise ships in 2016, one for the Holland American Line Cruise ship Koningsdam, a through the ceiling sculpture, and is now working on a new one for the twin ship. For the TUI cruise ship, Mein Schiff 5, he created a 5 meter high, Autumn Tree installation in the Champagne bar. More sculptures went to the USA in 2017: 7 red pieces to 1355 Peachtree in Atlanta to liven up their atrium and a ‘surf’ wave to the Timbers Kauai Resort in Hawaii. Sarah Gordon, from Canvas Art Consultants in Hong Kong, described the sculpture Peter made for their show residence, Blue Shell, as “a piece made of pure new linnen that has been beaten to pulp, with water in a paper mill, and formed into the sculpture that hangs here. The use of blue pigments in the wet white pulp give it its marbled, sea like character. As the water leaves the pulp, Peter shapes it, like an alchemist visually capturing the power of nature when he freezes the movement of paper as it dries. You see the strength of the paper fibers and can almost hear the crashing of the surf.” Early Years Peter Gentenaar was born in 1946 in Rijswijk, the Netherlands. In his youth, his drawings were very bloody cartoons or designs for cars and battleships. In high school, he took up puppet theater and puppet making with Tonke Dragt, his drawing teacher and a writer of children’s books. The sixties were the years of endless possibilities. He followed lessons in drawing, painting, sculpture and printmaking at the Free Academy in the Hague. In 1968, he studied one year with a grant of the Italian government at the Accademia di Brera, with Marino Marini, in Milano. The student revolt in Paris, in May of that year, spread to Italy and Peter was in the middle of it. California The following year, Peter went to California where he received his Master’s Degree in printmaking at the California College of Arts Crafts in Oakland. He bathed in the openness and warmth of the rich social life of the Americans. The hippy period was only just over its peak. He also met his future wife, Pat Torley, who was at the same college, studying fiber arts with Trude Guermonprez. Her lessons and personality were unforgettable for both Pat and Peter. They named the first of their two daughters after her. John Elsesser, Trude’s husband, was a carpenter and an organic gardener, making his compost with special techniques, that he taught to Peter, who later uses them at the farm in Holland. Meeting Sy Lowinsky, the publisher of ZAP Comics and owner of the Phoenix Gallery, resulted in Peter’s first exhibition of his paintings and prints in Berkeley. He enjoyed the work of ZAP Comic artists like Robert Crumb, Victor Moscoso and Clay Wilson and all the concerts and great radio stations which filled the days with music of the Grateful Death and Jefferson Airplane. The early works Back in Holland, in 1970, Peter set up a print studio in an old school building in the Hague. He was making figurative color lithographs with 6 to 12 color runs. The color intensity was important, as if the California sunlight still radiated in the gloomy school building. This feeling got stronger when Pat Torley arrived 4 months later. The young couple lived and worked in the studio first, until they found a house in Rijswijk. Peter started teaching model painting and drawing at his old academy, an inspiring experience. The academy grew rapidly in the seventies and classes with more than 40 students were normal, especially in the evenings. Making paper Though concentrating on his work in color lithography after returning from California, Peter found it limiting and reverted back to experiments he had made at Arts and Crafts, where he engraved and scratched drawings on thick pieces of Plexiglas. To use the half-inch thickness of the Plexiglas, he had drilled grooves into the surface to press the paper into. As the first prints were a success, he drilled the grooves deeper. This resulted in frustration because the paper was not able to fill that depth. He tried filling the gaps with torn, wetted and smashed bits of paper. These failed experiments stayed in his mind and an obvious solution came. Why not lay fresh wet paper on the Plexiglas to dry? He decided to solve the problem by starting a new experiment: papermaking. Sheet formers and vacuum pumps In a short period of time a lot happened: Peter received an experimental grant from the Ministry of Culture; he contacted the Royal Dutch Paper factory in Maastricht with questions about papermaking; the head of the fiber laboratory, Joop Persoon, taught Peter the basics of industrial papermaking and supplied him with materials to work on his own. Inspired by the laboratory in the factory, Peter didn’t work with a mould and deckle in the traditional way, but built a sheet former that used a vacuum pump to suck the water out of the pulp. Peter tried to copy the stainless-steel sheet formers at the laboratory in wood and bought a huge second hand vacuum pump. The results were disappointing, as the wooden sheet formers kept imploding. Eventually the vacuum technique became a success, thanks to a student in Peter’s model drawing class, a contractor who told him about a vacuum technique that is used to suck excess water out of freshly poured concrete. With this new inspiration, Peter built a vacuum table based on this principle, large enough to make a sheet of paper, 120 x 240 cm large. Later, he doubled this table surface in size. A new technique of sheet making by pulp pouring started to develop. The hollander Making the paper pulp was another problem. Old washing machines acquired new functions they could not cope with. Peter built a mixer in a 200-liter oil drum but this only separated the fibers and did not open their cell walls. It made a glorified type of paper mache, which he used to fill moulds. He also couched sheet after sheet, in different colors, on top of each other, pressed these packs dry, cut them with a band saw and endlessly sanded and polished them. The paper quality greatly improved when Peter was able to buy an old laboratory beater. It was an Umpherston type beater, made by Voigt in Germany, with a 7-horsepower electro motor.  Thanks to the hollander beater and the vacuum table, a new type of work emerged: the papers were brightly colored with pigments added during the beating. The fibers were mainly flax, from Belgium, bought in the vicinity of Kortrijk. The old school slowly changed into a small paper factory. The Peter Beater As the Voigt laboratory beater was not designed to mill unrefined long fibers, it broke down regularly. Peter decided to design his own beater, which would be easy to clean, and able to beat unrefined hemp and flax. He developed a beater that not only enabled him to produce specific pulp for his own paper art, but also contributed to small-scale paper making in Europe and beyond. He started the manufacture of his design of the Hollander beater and markets it under the name “Peter beater”. Among his clients are the Indians of the Amazon who make paper from jungle plants, the Sioux Indians in South Dakota who make hemp paper and, in the Netherlands, there are 10 institutes for the mentally handicapped, making paper with his machines. In order to offer a complete package, Peter developed a spindle press and a paper drier. A version of the “Peter beater”, with added safety features, was built for an institute for the blind and has a CE and KEMA safety certificate. The farm In 1983, the demolition of both their house and studio, caused a two-year interruption in Pat and Peter’s work. They bought a ruin of a 16th century farm, which they restored to use as their house and new studios. Back at work in 1985, Peter kept researching the effect of the hollander beating on the fibers. The drying of the fiber became crucial to determine the final form of the paperwork. A wet 2-dimensional shape was transformed into an ultra-light, 3-dimensional shape. Giving freedom to the material became the objective. Thin bamboo sticks were used to build a frame, which was covered with pulp on the vacuum table, where it was sucked dry. “Dry” is very relative here. There is a lot of water left behind in the fibers, but at this point the 2-dimensional shape is strong enough to be picked up and formed into a 3-dimensional shape above the wet vacuum table surface. The sculpture now has its rough form. Dehumidifiers and fans speed up the drying and the sculpture shrinks about 30%. The bamboo, unable to shrink, looks for the shortest way, and at the same time the fibers shrink in spiraling ways. The bamboo fights the shrinking but has to bend. The tension between the two materials is responsible for the final form in the sculpture. The memory of paper A papermaker uses the natural properties of the fiber. The paper he makes is as strong as the fibers he uses. Not every fiber is as well suited for paper making as another. Through the ages, papermakers have experimented with different fibers. Each kind of fiber gives a different paper. It can be durable like hemp paper or as short lived as wood pulp used for newsprint. Peter’s paper consists of plant fibers like hemp, cotton and flax, long fibers, in comparison to wood fibers. When these fibers are beaten in the Peter beater, the chains of fibrils that form the building blocks of the plant, are rubbed apart. Water fills the gaps between these microscopic filaments but does not change the properties of the fibers. Floating in water, the fibrils unite in a new order and when the water is drained, a sheet of paper is formed. If this sheet is not pressed flat, it will start to curl: the fiber remembers its past spiraling plant life. Under the press, this property can be restrained, but Peter prefers to use this quality to shape his work. The duration of the beating and the adjustment of the beater is directly related to the shrinkage of the fibers. Form control Peter’s sculptures were constructed using shapes borrowed directly from the plant world. After having imitated the spine structure of a leaf, he returned to more basic forms such as triangles, squares and trapezium’s. These show the baroque work of the shrinking force in a much more expressive way. The use of these basic shapes allows for more control over the end result and helps him to plan and dream new combinations. Bold colors added as pigments to the fibers during the last phase of the beating, make the sculptural forms more fantastic. Coloring the bamboo framework accentuates the form. The paint can bleed into the pulp, giving the sculpture surface the look of ceramic glazing. Light and movement The paper objects are independent sculptures but engage easily in a playful interaction with the surroundings. In Joop van den Ende’s musical theater, situated in the old Krupp Steel Works in Essen, Germany, lighting of varying colors is projected onto 20 paper sculptures that float in the space of the 20 meters high hall. The sculptures are hung in a system, enabling them to turn at the slightest movement of air. Paper and bronze In January 2005, the city of Capelle aan den Ijssel commissioned two 4 meter high paper sculptures, to be cast in bronze for a bridge. The thin paper sculptures were coated, on the inside, with a 4-mm thick layer of wax. The sculptures were each cut into three pieces and cast in bronze, using the lost wax method. Making a 4-meter-high sculpture in paper made great demands on the strength of the materials used. The tension of wet pulp drying on a skeleton of one meter high is much less than on a 6-meter structure. The vacuum table had to be enlarged to accommodate this size. The sculpture was constructed from two large triangles with curving rectangular shapes between them. During the drying and shrinking, there was a playfulness created between the stiff triangles and the rectangles that easily turn and twist. The sculptures are named “The Wings of the Pharaoh”, as a tribute to the much older papyrus. Experiments In the course of his 40 years of making paper, the question of the durability of Peter’s work was often put to him. Paper is seen as a disposable product and making sculptures with it does not immediately change people’s idea of paper. In the laboratory of the Royal Library in The Hague, Peter asked Henk Porck, chemist and head of the Paper Historical Department, to place one of his paper sculptures with a bamboo frame in an aging cabinet. The sculpture was cut in two, so that just like in a commercial, a comparison could be made between the “before and after” pieces. After three weeks in this aging cabinet, which equals 300 years, the paper had yellowed slightly but was still as strong and bouncy as the piece that had not been aged. The Holland Paper Biennial To generate more attention for paper art, Pat and Peter organized a congress for the International Association of Hand papermakers and Paper artists, the IAPMA, with 7 international exhibitions of paper art, in 1994 in the Netherlands. The response to these events inspired Peter to organize the first Holland Paper Biennial in the Museum of Rijswijk in 1996. Each paper biennial was accompanied by a book in two parts: a section with stories about paper culture and paper history; and a catalogue section, containing photo’s, stories and paper samples of the paper art on exhibit in the biennial. The stories were all collected and edited by Peter. Loes Schepens did all the graphic design. Pat and Peter have been the publishers of the books including Paper Water. The publishing work involved so much administration that a professional publisher, Compress in Leiden, was asked in 2002, to take over the business end, leaving the book making with Loes, Pat and Peter. This cooperation has led to 7 biennial books, which have won many design prizes: 1996 Tactile Paper (sold out), 1998 Paper Fire, 2000 Paper Water, 2002 Timeless Paper, 2004 Spirit of Paper and 2006 Paper takes flight. In 2008, the last book in this series called: Pure Paper, was published. The Paper Biennials in the Museums of Rijswijk and Apeldoorn still continue. Peter’s work has been regularly exhibited, in 2016 his work could be seen in Le Musee du Louvre, Paris and in Le Musee de Becanson, France. The big show in 2017 was at the Suzhou Jinji Lake Art Museum, April 29th, until June 11th, Suzhou China. From July 1st to the 22nd 2018, Peter and Pat Gentenaar will be exhibiting their work at Pulchri Studio, Lange Voorhout 15, Den Haag.

Creator:
Peter Gentenaar (1946)
Creation Year:
2018
Dimensions:
Height: 78.75 in (200 cm)Width: 47.25 in (120 cm)Depth: 27.56 in (70 cm)
Medium:
Handmade Paper
Movement Style:
Contemporary
Period:
2010-
Condition:
Gallery Location:
Eindhoven, NL
Reference Number:
1stDibs: LU124926320742

21st Century and Contemporary Contemporary Abstract Sculptures

Materials

Paper

Daria Aksenova
"Illusionary Paper Series “Frosted Lemon” III", Hand-Cut, Suspended Paper, 2020

$360

H 10 in W 10 in D 1 in

"S&S&S&S 4 in Iridescent Aquamarine on Pink", Folded Paper, Abstract Patterns

By Matt Shlian

Located in Philadelphia, PA

This piece titled "S&S&S&S 4 in Iridescent Aquamarine on Pink" is an original piece by Matt Shlian and is made from hand-folded archival paper. This piece measures 16.5”h x 11.5”w x ...

Category

21st Century and Contemporary Contemporary Abstract Sculptures

Materials

Archival Paper

Matt Shlian
"S&S&S&S 4 in Iridescent Aquamarine on Pink", Folded Paper, Abstract Patterns, 2022

$4,200

H 16.5 in W 11.5 in D 1 in

Hot Oak, Emma Levine, floral print, original work, colourful, landscape,

By Emma Levine

Located in Deddington, GB

Original work by Emma Levine, ‘Hot Oak.’ A bright, colourful hot pink silk background with a laser cut paper oak tree attached with pins. 53cm x 53cm – Framed Silk, paper, entomology...

Category

21st Century and Contemporary Contemporary Abstract Sculptures

Materials

Paper, Silk, Pins

Emma Levine
Hot Oak, Emma Levine, floral print, original work, colourful, landscape,, 2016

$2,869

H 20.87 in W 20.87 in D 2.76 in

Lulo 1 2 - Contemporary sculptures by Zlata Kornilova, Yakisugi Burnt Wood

Located in Paris, FR

Sculptures Lulo 1 & 2 by Zlata Kornilova Limited edition of 12 Dimensions - Lulo 1 : H. 89 cm x D. 27 cm - Lulo 2 : H. 89 cm x D. 27 cm Mediums: Ash...

Category

21st Century and Contemporary Contemporary Abstract Sculptures

Materials

Brass

Zlata Kornilova
Lulo 1 2 - Contemporary sculptures by Zlata Kornilova, Yakisugi Burnt Wood, circa 2022

$8,949

H 35.04 in Dm 10.63 in

Ofrenda I by Camilo Andres Rodriguez Marquez aka Carmworks

By Camilo Andres Rodriguez Marquez

Located in Paris, FR

Ofrenda I by Camilo Andres Rodriguez Marquez Burnt Wood Sculpture Dimensions: H. 75 x 74 x 30 cm Camilo Andres Rodriguez Marquez is a Colombian...

Category

21st Century and Contemporary Contemporary Abstract Sculptures

Materials

Wood, Oak

Camilo Andres Rodriguez Marquez
Ofrenda I by Camilo Andres Rodriguez Marquez aka Carmworks, 2022

$2,500

H 29.53 in W 29.14 in D 13.78 in

Humanity, Petr Weigl, contemporary, bone china, gold lustre, unique, similarity

Located in Knowle Lane, Cranleigh

Humanity is more alike than we often realise. We all share the same basic needs, desires, and concerns, no matter our background or culture. This series pays homage to the craft of c...

Category

2010s Contemporary More Art

Materials

Metal, Gold

Petr Weigl
Humanity, Petr Weigl, contemporary, bone china, gold lustre, unique, similarity, Circa 2015

$9,905

H 17.72 in W 17.72 in D 2.56 in

Tin Can Light - Original Sculpture Lamp

By Boris Shpeizman

Located in AMSTERDAM, NL

Drawing from the ethos of giving new life to the discarded, this sculpture of eco-art presents a striking lamp sculpture that marries the elegance of blown glass with the grounded, e...

Category

2010s Contemporary More Art

Materials

Metal

Boris Shpeizman
Tin Can Light - Original Sculpture Lamp, 2020

$1,435 Sale Price

20% Off

Free Shipping

H 13.78 in W 7.88 in D 6.7 in

Summer - Original Wall Sculpture

Located in AMSTERDAM, NL

Step into the vibrant essence of summer with Roy Yariv's original wall sculpture "Summer," a striking composition where abstract painting and op art converge in a multidimensional fe...

Category