Daughter Mfg Furniture

This is the Empire Lamp, an extruded aluminum table lamp that is now in production. There are made in a limited series of 100. Each lamp will be stamped the number corresponding its ...

These are spun brass votive cups, standing 2.5" tall. They have natural brass markings, are beautifully organic by the natural aging process of brass, and are design to be a modern ...

These are spun brass Salt & Pepper Shakers. Roughly 2.5" in diameter and 3" tall. These come in three finishes : unfinished, satin, and polished brass. They are heavy, but easy for ...

This stunning clock is made of a single spun piece of solid brass. It is designed with inlaid varying sized brass rings and then filled with tinted epoxy poured. The hour and min...

These drawer pulls by Daughter Manufacturing are 2" in diameter, made of solid brass, spun into a shell and filled with tinted epoxy. This size ...

This stunning clock is made of a single spun piece of solid brass. It is designed with inlaid varying sized brass rings and then filled with tinted epoxy poured. The hour and min...

This stunning clock is made of a single spun piece of solid brass. It is designed with inlaid varying sized brass rings and then filled with tinted epoxy poured. The hour and min...

These aluminum Teardrop Sconces have an outer shell that is made from two halves made from 6101 aluminum that have been joined together using a pin and groove joinery. The material i...

These brass Teardrop Sconces have an outer shell that is made from two halves made from 385 brass (also known as architectural bronze) that have been joined together using a pin and ...

Pagoda Lamp Model 1 is one half of a pair of lamps designed and fabricated during 2021. The inspiration is the Peace Pagoda in San Francisco's Japantown neighborhood designed by Yoshiro Taniguchi, constructed in the 1960s. The center column of the lamp is constructed from pieces of 1/8" aluminum sheet that have been polished on all sides and assembled into a circular lattice structure. Each opening in the lattice has individually poured "windows" made from a clear epoxy that have some small bubbles and irregularities that mimic a hand-made glass. The windows are pierced by 1/16" diameter brass rods that run the length of the circular lattice and help to hold the windows in place. The interior is lit by a T-10 elongated bulb, which sits slightly proud of the top surface of the lamp. There are a total of four spun pieces of 1100-series aluminum that adorn the circular lattice, comprised of the top cap (1) and mini-shades (3), which are equally spaced along the length of the circular lattice structure. These have all been hand-polished. The top cap is held in place with a snug slip fit (which can be easily taken on and off), while the mini-shades are held in place with small machined brass connectors and 4-40 brass slotted roundhead screws. The base is constructed from two 1100-series aluminum shells that have been spun and hand-polished. Circular tool marks left by the spinning process have been left behind to add visual interest. The interior of the base houses a large black-anodized aluminum ring, roughly 7/8" thick, that is used to join the halves together and houses the vintage AH & H ball...

Pagoda Lamp Model 1 is one half of a pair of lamps designed and fabricated during 2021. The inspiration is the Peace Pagoda in San Francisco's Japantown neighborhood designed by Yoshiro Taniguchi, constructed in the 1960s. The center column of the lamp is constructed from pieces of 1/8" aluminum sheet that have been polished on all sides and assembled into a circular lattice structure. Each opening in the lattice has individually poured "windows" made from a clear epoxy that have some small bubbles and irregularities that mimic a hand-made glass. The windows are pierced by 1/16" diameter brass rods that run the length of the circular lattice and help to hold the windows in place. The interior is lit by a T-10 elongated bulb, which sits slightly proud of the top surface of the lamp. There are a total of four spun pieces of 1100-series aluminum that adorn the circular lattice, comprised of the top cap (1) and mini-shades (3), which are equally spaced along the length of the circular lattice structure. These have all been hand-polished. The top cap is held in place with a snug slip fit (which can be easily taken on and off), while the mini-shades are held in place with small machined brass connectors and 4-40 brass slotted roundhead screws. The base is constructed from two 1100-series aluminum shells that have been spun and hand-polished. Circular tool marks left by the spinning process have been left behind to add visual interest. The interior of the base houses a large black-anodized aluminum ring, roughly 7/8" thick, that is used to join the halves together and houses the vintage AH & H ball...