Skip to main content
Want more images or videos?
Request additional images or videos from the seller
1 of 15

Set of 4 Mid-Century Modern Dining Chairs by Charles Eames for Herman Miller

$9,500per set
£7,246.29per set
€8,269.44per set
CA$13,359.49per set
A$14,662.36per set
CHF 7,705.28per set
MX$174,479.09per set
NOK 98,496.43per set
SEK 90,006.24per set
DKK 61,780.90per set

About the Item

A nice early set of four DCW chairs designed by Charles Eames and produced by Herman Miller in the 1950's. These feature dark stained plywood construction. Nice warm patina and likely refinished at some point. Evidence of a few small repaired edge chips. Beautiful overall condition.
  • Creator:
    Herman Miller (Manufacturer),Charles Eames (Designer)
  • Dimensions:
    Height: 29 in (73.66 cm)Width: 20 in (50.8 cm)Depth: 22.5 in (57.15 cm)Seat Height: 18.75 in (47.63 cm)
  • Sold As:
    Set of 5
  • Style:
    Mid-Century Modern (Of the Period)
  • Materials and Techniques:
  • Place of Origin:
  • Period:
  • Date of Manufacture:
    1950s
  • Condition:
    Repaired: Professionally filled edge chips. Refinished. Wear consistent with age and use.
  • Seller Location:
    Philadelphia, PA
  • Reference Number:
    1stDibs: LU1273231131352

More From This Seller

View All
1940s Pair of Early Charles Eames for Herman Miller LCW Lounge Chairs in Oak
By Herman Miller, Evans Products Company, Charles and Ray Eames
Located in Philadelphia, PA
Designed in the late 1940s by Charles Eames, this chair has cemented itself in Mid-Century Design like very few other pieces. Early models like this are difficult to come by and are very rarely in such good condition, as many have been worked on in some way or another before their value shot up. These chairs feature a super sleek design of steam-bent plywood, an incredibly innovative technique pioneered by Herman Miller in collaboration with the Eames's and manufacturing firm Evans. The large seat and back are mounted to a molded plywood base with rubber shock mounts, another Eames staple. This allows them to have excellent contrast through spacing, which gives them an excellent stance, almost insect-like. Both are early chairs with the correct screw configurations beneath. This pair features all original hardware, finish, and shock mounts. Very few blemishes, and those that exist are minimal, barely visible even in our high-res pictures. At this time, we have two early pairs, as seen in in photos. We also have another single early model, and two extremely rare pre-production chairs with the accompanying molded plywood coffee table...
Category

Vintage 1940s American Mid-Century Modern Lounge Chairs

Materials

Plywood

1940s Pair of Early Charles Eames for Herman Miller Lcw Lounge Chairs in Birch
By Charles and Ray Eames, Evans Products Company, Herman Miller
Located in Philadelphia, PA
Designed in the late 1940s by Charles Eames, this chair has cemented itself in Mid-Century Design like very few other pieces. Early models like this are difficult to come by and are very rarely in such good condition, as many have been worked on in some way or another before their value shot up. These chairs feature a super sleek design of steam-bent plywood, an incredibly innovative technique pioneered by Herman Miller in collaboration with the Eames's and manufacturing firm Evans. The large seat and back are mounted to a molded plywood base with rubber shock mounts, another Eames staple. This allows them to have excellent contrast through spacing, which gives them an excellent stance, almost insect-like. Both are early chairs with the 5-2-5 screw configurations beneath. This pair features all original hardware, finish, and shock mounts. Very few blemishes, and those that exist are minimal, barely visible even in our high-res pictures. At this time, we have two early pairs, as seen in in photos. We also have another single early model, and two extremely rare pre-production chairs with the accompanying molded plywood coffee table...
Category

Vintage 1940s American Mid-Century Modern Lounge Chairs

Materials

Rubber, Wood, Plywood

Charles Ray Eames, Herman Miller Set of 4 Dowel Leg DAW Armchairs Orange
By Charles and Ray Eames
Located in Philadelphia, PA
Designed by Eames, of recent manufacture by Herman Miller, these signed chairs are in like new condition. Each still retaining hang tags, shells are made of white plastic with an off...
Category

Early 2000s American Mid-Century Modern Chairs

Materials

Metal

Mid-Century Charles Eames for Herman Miller Fiberglass Dining Chairs in Orange
By Charles Eames, Herman Miller
Located in Philadelphia, PA
Here we have an iconic design classic from the Mid-Century Modern period. This vintage fiberglass shell chair was designed by Charles Eames and produced by Herman Miller, circa 1972....
Category

Vintage 1970s American Mid-Century Modern Dining Room Chairs

Materials

Steel

Set of Four Mid-Century Modern Upholstered Dining Chairs by DIA
By Design Institute America
Located in Philadelphia, PA
A beautiful set of four dining chairs designed by Design Institute of America. These feature fully upholstered metal frames on casters. Upholstery is original and needs recovering. O...
Category

Vintage 1980s American Mid-Century Modern Dining Room Chairs

Materials

Metal

Set of 4 Charles Eames for Herman Miller PAC Armchairs in White Fiberglass 1970s
By Herman Miller, Charles Eames, Ray Eames
Located in Philadelphia, PA
Designed in post-war America, these chairs were made in the 1970s. Commonly attributed exclusively to Charles Eames by literature of the era and Herman Miller itself, Ray was certain...
Category

Vintage 1970s American Mid-Century Modern Armchairs

Materials

Aluminum

You May Also Like

Set of Eames upholstered side chairs by Herman Miller
By Charles and Ray Eames, Herman Miller
Located in Highland, IN
This set of side chairs by Charles and Ray Eames are post-war classics. The seats are elephant hide gray fiberglass with olive green naugahyde upholstery and they sit on cast aluminu...
Category

Vintage 1950s American Mid-Century Modern Dining Room Chairs

Materials

Aluminum

Set of Four Herman Miller Eames DCM Dining Chairs
By Charles and Ray Eames, Herman Miller
Located in Brooklyn, NY
Vintage Herman Miller Eames DCM dining chair set. Executed in ash and chrome steel bases. All screws and self leveling glides intact. In even condition with...
Category

21st Century and Contemporary American Mid-Century Modern Dining Room Ch...

Materials

Steel

Set of Four Eames for Herman Miller Pedestal Chairs
By Herman Miller
Located in Asheville, NC
Four Herman Miller black leather upholstered pedestal chairs, underside stamped, December 19th 1975 on black aluminum and steel pedestal bases.
Category

Vintage 1970s American Mid-Century Modern Side Chairs

Materials

Upholstery

Series of six chairs, by Charles Eames, Editions Herman Miller, USA, circa 1961
By Charles Eames, Herman Miller
Located in Paris, FR
Set of six DSL chairs, designed by Ray and Charles Eames in 1961. These six chairs were produced by Herman Miller in the USA C. 1961. The chairs are comprised of a fiberglass shell s...
Category

Vintage 1960s American Mid-Century Modern Chairs

Materials

Aluminum

Set of 4 First Edition Eames Evans DCM Chairs
By Charles and Ray Eames
Located in Seattle, WA
Four Early DCM chairs designed by Charles & Ray Eames for Evans, distributed by Herman Miller. Labels remain intact on all four chairs. Shock mounts has been...
Category

Vintage 1940s North American Mid-Century Modern Dining Room Chairs

Materials

Plywood

C. 1948 Set of 4 Evans Herman Miller Eames DCW Dining Chairs in Calico Ash
By Charles and Ray Eames, Herman Miller
Located in Philadelphia, PA
This is a set of four DCW Dining Chairs in Calico Ash, initially designed by Charles and Ray Eames in 1946. These are ultra-rare, early examples that were produced by the Evans Plywo...
Category

Vintage 1940s American Modern Side Chairs

Materials

Steel