Skip to main content
Want more images or videos?
Request additional images or videos from the seller
1 of 12

1946 Pair of RARE Evans Eames Herman Miller DCW Dining Chairs in Calico Ash

$5,000per set
£3,779.01per set
€4,331.40per set
CA$6,974.91per set
A$7,606.03per set
CHF 4,021.64per set
MX$91,493.43per set
NOK 51,035.24per set
SEK 46,773.32per set
DKK 32,352.86per set

About the Item

This is a pair of DCW Dining Chairs in Calico Ash, originally designed by Charles and Ray Eames in 1946. These are ultra-rare, early examples that were produced by the Evans Plywood Company. These came to us via the estate of a Cornell University professor in Ithaca, New York. One chair retains its original Evans label, which is the earliest label used aside from those used on pre-production models. Each chair measures 20.5 inches deep, 19.5 inches wide, and 29 inches high. Their seat height is 18 inches. One chair does have some scratches on the front surface, and there is patina present on both pieces’ original screws and hardware on underside. There is some slight fading to the finish of the seats. Overall, this important pair is in good vintage condition with some signs of time. Please see photos. Genuinely faulty goods will be replaced or money refunded on a case by case basis, however we must be advised of any faulty goods upon receipt of the item. It is the customer's responsibility to pay for return shipping and ship the item back to us. If the item is found to be faulty, we will also refund the postage cost. If there is no damage to the item, but a return is approved, the buyer will be responsible for both the initial and return shipping cost. It is at our discretion to refuse the refund of undamaged goods. If an order is placed and you would like to cancel the order, please notify us immediately. Any refunds will be processed via the same means that payment was made.
  • Creator:
  • Dimensions:
    Height: 29 in (73.66 cm)Width: 19.25 in (48.9 cm)Depth: 20.5 in (52.07 cm)
  • Sold As:
    Set of 2
  • Style:
    Modern (In the Style Of)
  • Materials and Techniques:
  • Place of Origin:
  • Period:
  • Date of Manufacture:
    1946
  • Condition:
    Wear consistent with age and use.
  • Seller Location:
    Philadelphia, PA
  • Reference Number:
    Seller: 230822021stDibs: LU8164240509162

More From This Seller

View All
1946 Pair of Eames Evans DCW Dining Chairs in Calico Ash Wood
By Charles and Ray Eames, Evans Products Company
Located in Philadelphia, PA
This is a pair of DCW Dining Chairs in Calico Ash, originally designed by Charles and Ray Eames in 1946. These are ultra-rare, early examples that were produced by the Evans Plywood ...
Category

Vintage 1940s American Modern Side Chairs

Materials

Steel

1950s Pair of Herman Miller Eames LCW Lounge Chairs in Calico Ash
By Charles and Ray Eames, Herman Miller
Located in Philadelphia, PA
This is a pair of LCW Lounge Chairs, originally designed by Ray and Charles Eames in 1948. They are early Herman Miller examples and feature the 5-2-4 screw pattern, dating back to t...
Category

Vintage 1950s American Modern Lounge Chairs

Materials

Steel

C. 1948 Set of 4 Evans Herman Miller Eames DCW Dining Chairs in Calico Ash
By Herman Miller, Charles and Ray Eames
Located in Philadelphia, PA
This is a set of four DCW Dining Chairs in Calico Ash, initially designed by Charles and Ray Eames in 1946. These are ultra-rare, early examples that were produced by the Evans Plywo...
Category

Vintage 1940s American Modern Side Chairs

Materials

Steel

C. 1955 Charles and Ray Eames for Herman Miller DCM Chair in Calico Ash
By Charles and Ray Eames, Herman Miller
Located in Philadelphia, PA
This is an early DCM Chair, originally designed by Charles and Ray Eames in 1946. The piece was produced by Herman Miller and retains its tag under the seat....
Category

Vintage 1950s American Modern Side Chairs

Materials

Steel

1954 Charles and Ray Eames for Herman Miller DCM Chair in Calico Ash
By Charles and Ray Eames, Herman Miller
Located in Philadelphia, PA
This is an Eames DCM Side Chair, originally designed by Charles and Ray Eames in 1946. This particular example dates to approximately 1954 and has its foil patent pending sticker int...
Category

Vintage 1950s American Modern Side Chairs

Materials

Steel

C. 1953 Herman Miller Eames LCW Lounge Chair in Calico Ash
By Charles and Ray Eames, Herman Miller
Located in Philadelphia, PA
This is an LCW Lounge Chair, originally designed by Charles and Ray Eames in 1948. It is an early Herman Miller example featuring the 5-2-4 screw pattern, dating it to ca. 1953. The ...
Category

Vintage 1950s American Modern Lounge Chairs

Materials

Steel

You May Also Like

Pair of Charles and Ray Eames Herman Miller Calico Ash DCW chairs
By Charles Eames, Charles and Ray Eames, Herman Miller, Ray Eames
Located in Ferndale, MI
Pair of chairs designed by the Eames office headed by Charles and Ray Eames manufactured by Herman Miller . Designated as DCW ( dining chair wood ) chairs . Both chairs are Ash wood...
Category

Mid-20th Century American Mid-Century Modern Dining Room Chairs

Materials

Plywood

Set of Two Eames DCW Lounge Chairs in Walnut for Herman Miller, USA, 1950s
By Herman Miller, Charles and Ray Eames
Located in Berlin, DE
Set of two Eames DCWlounge chairs in walnut for Herman Miller, USA. The DCW chair, also known as the dining chair wood, is a modernist furniture design created by the husband-and-wif...
Category

Vintage 1950s American Mid-Century Modern Dining Room Chairs

Materials

Walnut

Pair of Early Walnut Eames DCWs Dining Chair Wood for Herman Miller
By Charles and Ray Eames, Herman Miller
Located in Brooklyn, NY
Gorgeous pair of early Eames DCW dining chairs in walnut. An ergonomic dining chair that is attractive as is comfortable to lounge in, like its...
Category

20th Century Mid-Century Modern Dining Room Chairs

Materials

Walnut

1940s Pair of Early Charles Eames for Herman Miller LCW Lounge Chairs in Oak
By Charles and Ray Eames, Evans Products Company, Herman Miller
Located in Philadelphia, PA
Designed in the late 1940s by Charles Eames, this chair has cemented itself in Mid-Century Design like very few other pieces. Early models like this are difficult to come by and are very rarely in such good condition, as many have been worked on in some way or another before their value shot up. These chairs feature a super sleek design of steam-bent plywood, an incredibly innovative technique pioneered by Herman Miller in collaboration with the Eames's and manufacturing firm Evans. The large seat and back are mounted to a molded plywood base with rubber shock mounts, another Eames staple. This allows them to have excellent contrast through spacing, which gives them an excellent stance, almost insect-like. Both are early chairs with the correct screw configurations beneath. This pair features all original hardware, finish, and shock mounts. Very few blemishes, and those that exist are minimal, barely visible even in our high-res pictures. At this time, we have two early pairs, as seen in in photos. We also have another single early model, and two extremely rare pre-production chairs with the accompanying molded plywood coffee table...
Category

Vintage 1940s American Mid-Century Modern Lounge Chairs

Materials

Plywood

Mid Century Pair of LCW Chairs by Charles and Ray Eames for Evans, 1940s
By Charles and Ray Eames
Located in Ibiza, Spain
Pair of LCW chairs designed in 1945 by Charles and Ray Eames, one of the most iconic pieces of 20th-century modern design, revolutionized the world of furniture by introducing an inn...
Category

Vintage 1940s American Mid-Century Modern Chairs

Materials

Wood

Charles and Ray Eames Early DCW Ash Plywood Dining Chairs for Herman Miller
By Herman Miller, Charles Eames, Charles and Ray Eames
Located in Amsterdam, NL
Iconic Charles Ray Eames DCW dining side chairs in Ash plywood. Early Herman Miller production from the fifties (5-2-5 screw configuration), just after Herman Miller took over ...
Category

Vintage 1940s American Mid-Century Modern Dining Room Chairs

Materials

Rubber, Plywood, Ash