Skip to main content
1 of 6

Lounge Chair Wood LCW by Charles Eames for Herman Miller USA 1950 s

$3,300List Price

You May Also Like

Set of Two 2 Herman Miller LCW Lounge Chairs by Charles Ray Eames, USA
By Herman Miller, Charles and Ray Eames
Located in Deland, FL
Stately, minimal but certainly not understated. This 90's produced pair of LCW chairs by Charles and Ray Eames for Herman Miller has been reimaged in matte black; offered for your consideration as a limited custom release from ABT Modern. From the first of the plywood series, the abbreviated Eames LCW Chair was the Lounge Height (L) Side Chair (C) on Wood (W) Base. Designed by Charles Eames and first manufactured by the Evans Molded Plywood Division, the chair has long gained classic status. The techniques used to make these unique chairs had been developed during the war years and was evident in the Eames Splint, made for and utilized by the US Navy. The Eames LCW Plywood Chair...
Category

1990s American Mid-Century Modern Lounge Chairs

Materials

Walnut

1950s Herman Miller Eames LCW Lounge Chair in Walnut
By Herman Miller, Charles and Ray Eames
Located in Philadelphia, PA
This is an LCW Lounge Chair, originally designed by Charles and Ray Eames in 1948. It is an early Herman Miller example featuring the 5-2-4 screw pattern. The chair is composed of wa...
Category

Vintage 1950s American Modern Lounge Chairs

Materials

Steel

Eames LCM Lounge Chair, Herman Miller, USA, 1950s
By Charles and Ray Eames, Herman Miller
Located in Lewes, East Sussex
An Eames LCM lounge chair, Herman Miller, USA, 1950s. Ash plywood, chrome-plated steel and original rubber feet caps. With manufacturers label. ...
Category

Vintage 1950s North American Mid-Century Modern Lounge Chairs

Materials

Steel

Eames LCM Lounge Chair, Herman Miller, USA, 1950s
$1,640
H 26.38 in W 22.05 in D 25.6 in
C. 1953 Charles and Ray Eames for Herman Miller LCW Lounge Chair in Walnut
By Charles and Ray Eames, Herman Miller
Located in Philadelphia, PA
This is an Eames LCW Lounge Chair in Walnut Plywood, initially designed by Ray and Charles Eames in 1946. This example dates to ca. 1953. The chair measures 25 inches long, 22 inc...
Category

Vintage 1950s American Modern Lounge Chairs

Materials

Steel

Charles Ray Eames Early LCW Lounge Chair for Herman Miller, 1951
By Charles Eames, Herman Miller
Located in Buffalo, NY
Iconic Charles & Ray Eames LCW lounge chair in Birch plywood. Early Herman Miller production from the fifties (5-2-4 screw configuration), just after Herman Miller took over producti...
Category

Vintage 1950s American Mid-Century Modern Lounge Chairs

Materials

Birch, Plywood

Charles Ray Eames Early LCW Lounge Chair for Herman Miller, 1951
By Herman Miller, Charles Eames
Located in Buffalo, NY
Iconic Charles & Ray Eames LCW lounge chair in Birch plywood. Early Herman Miller production from the fifties (5-2-4 screw configuration), just after Herman Miller took over producti...
Category

Vintage 1950s American Mid-Century Modern Lounge Chairs

Materials

Birch, Plywood

1940s Pair of Early Charles Eames for Herman Miller Lcw Lounge Chairs in Birch
By Charles and Ray Eames, Herman Miller, Evans Products Company
Located in Philadelphia, PA
Designed in the late 1940s by Charles Eames, this chair has cemented itself in Mid-Century Design like very few other pieces. Early models like this are difficult to come by and are very rarely in such good condition, as many have been worked on in some way or another before their value shot up. These chairs feature a super sleek design of steam-bent plywood, an incredibly innovative technique pioneered by Herman Miller in collaboration with the Eames's and manufacturing firm Evans. The large seat and back are mounted to a molded plywood base with rubber shock mounts, another Eames staple. This allows them to have excellent contrast through spacing, which gives them an excellent stance, almost insect-like. Both are early chairs with the 5-2-5 screw configurations beneath. This pair features all original hardware, finish, and shock mounts. Very few blemishes, and those that exist are minimal, barely visible even in our high-res pictures. At this time, we have two early pairs, as seen in in photos. We also have another single early model, and two extremely rare pre-production chairs with the accompanying molded plywood coffee table...
Category

Vintage 1940s American Mid-Century Modern Lounge Chairs

Materials

Rubber, Wood, Plywood

1940s Pair of Early Charles Eames for Herman Miller LCW Lounge Chairs in Oak
By Herman Miller, Evans Products Company, Charles and Ray Eames
Located in Philadelphia, PA
Designed in the late 1940s by Charles Eames, this chair has cemented itself in Mid-Century Design like very few other pieces. Early models like this are difficult to come by and are very rarely in such good condition, as many have been worked on in some way or another before their value shot up. These chairs feature a super sleek design of steam-bent plywood, an incredibly innovative technique pioneered by Herman Miller in collaboration with the Eames's and manufacturing firm Evans. The large seat and back are mounted to a molded plywood base with rubber shock mounts, another Eames staple. This allows them to have excellent contrast through spacing, which gives them an excellent stance, almost insect-like. Both are early chairs with the correct screw configurations beneath. This pair features all original hardware, finish, and shock mounts. Very few blemishes, and those that exist are minimal, barely visible even in our high-res pictures. At this time, we have two early pairs, as seen in in photos. We also have another single early model, and two extremely rare pre-production chairs with the accompanying molded plywood coffee table...
Category

Vintage 1940s American Mid-Century Modern Lounge Chairs

Materials

Plywood

Charles and Ray Eames for Herman Miller Early Aniline Dye Red LCW Chair 1950s
By Herman Miller, Charles and Ray Eames
Located in Brooklyn, NY
Red aniline dye LCW lounge chair, designed by Charles and Ray Eames and manufactured by Herman Miller. The aniline-dyed wood is vibrant and rich, showcasing the dramatic grain undern...
Category

Vintage 1950s American Mid-Century Modern Lounge Chairs

Materials

Plywood

Early Eames Herman Miller LCW
By Charles and Ray Eames, Herman Miller
Located in New York, NY
Hard to find early Eames design lounge chair, in very good, clean, ready to use condition. The chair features the large single piece rubber bumper and 4/2/5 screw configuration, help...
Category

Mid-20th Century American Mid-Century Modern Lounge Chairs

Materials

Metal

Early Eames Herman Miller  LCW
$2,800
H 26.5 in W 22 in D 23 in

Still Thinking About These?

All Recently Viewed