Orba Wall System

Impressive wall system of extruded polished aluminum half cylinder uprights with full cylindrical horizontal arms extending to hold 7 half inch thick glass shelves and one angle shelf for art, book or magazine display. The 3' diameter aluminum components hold lighting and shelves. Patented design by Schweitzer incorporates sophisticated engineering to achieve the appearance of invisible joinery at each cantilevered shelf...

Wall unit with adjustable shelving system, cabinet, chest and flip top desk in rosewood, teak and mahogany by I.S.A., Italian 1964 (label on...

Versatile freestanding wall-unit/bookcase in oak, walnut, and pine with aluminum, steel, and brass accents by Jitona (1968, Lomnice nad Lužnicí, Czechoslovakia). Five bays can be assembled in total if all pieces are utilized together - seven pine rails, three long shelves, three long cabinets (including one that is half drawers/half open storage), three long glass fronted cabinets, two shorter cabinets, three shorter glass fronted cabinets, and one drop-down cabinet/bar with glass shelves. All cabinet shelves are removable, though not adjustable. Feet for the cabinets and rails are all adjustable, and the disks on the rails offer stability and protection to both floors and ceilings when adjustments are made. The longer pieces displayed as the three bay unit are all 35.25" long, while the shorter pieces displayed as the two bay unit are all 29.5" L. The configuration options for this highly functional unit are limitless. The bar cabinet, five-drawer walnut chest, glass-fronted cabinets, door-fronted cabinets, and two shelves can be custom-assembled based on requirements/aesthetic preference; the shorter pieces just need to be arranged within the same two bays. The legs for all cabinets can be removed, though, depending on the heft of the items displayed/stored, wall-mounting might be required if the weight is too great for the rails alone to adequately support. The 29.38" high cabinets with legs (if using the legs) must be arranged at the bottom, leaving 64.75" of usable rail height for mounting the other pieces. There are some fleabites to the glass (mostly to the edges concealed by the wooden frame when closed) along with light wear the wood consistent with age/use. Conservatively restored and in very fine, vintage condition. Assembled as a 5-bay unit as shown in the fifth image: Measures: H: 105.38" x L: 171" x D: 16". Assembled as a 3-bay unit with the longer pieces: H: 105.38" x L: 109.63" x D: 16" Assembled as a 2-bay until with the shorter pieces: H: 105.38" x L: 62" x D: 15.63" Each piece of the 3-bay system's measurements - * Two cabinets with doors: Exterior - H: 29.38" (with legs) / 18.5" (without) x L: 35.25" x D: 15.75" / 16.75" (with pls) Interior - Height above the shelf: 7.25" / below 8.25" x L: 34" x D: (shelf) 13.25" / lower surface 14.25" * Drawers: Exterior - H: 29.38" (with legs) / 18.5" (without) x L: 17.5" x D: 15.75" / 16.75" (with drawer pls) Interior (each drawer) - H: 2" x L: 15.38" x D: 13.25" * Small cabinet: Exterior - H: 29.38" (with legs) / 18.5" (without) x L: 17.5" x D: 15.75" / 16.75" (with pls) Interior - Height above the shelf: 8.25" / below 8.25" x L: 16" x D: 14.38" * Glass-fronted cabinets: Exterior - H: 24.5" x L: 35.25" x D: 9.75" Interior - Height above the shelf: 11" / below 11.5" x L: 34" x D: (shelf) 8" / lower surface 9" * Three shelves - H: 0.63" x L: 35.25" x D: 9.75" Each piece of the 2-bay system's interior measurements - * Two cabinets with doors: Exterior - H: 29.75" (with legs) / 18.63" (without) x L: 29.5" x D: 15.63" / 16.63" (with drawer pls) Interior - Height above the shelf: 8" / below 8.5" x L: 28" x D: (shelf) 13.13" / lower surface 14.38" * Glass-fronted cabinets: Exterior - H: 24.25" x L: 29.5" x D: 10" Interior - Height above the shelf: 11.13" / below 11.25" x L: 28" x D: (shelf) 7.75" / lower surface 8.13" * Bar cabinet: Exterior - H: 18.25" x L: 29.5" x D: 10" / 25.88" (when open) Interior - Height (excluding shelves): 16.88" x L: (left side) 9" / (right side) 18.5" x D: 7.75" (shelf) Rails alone: H: 105.38" (the height can be adjusted via a rail extender to, which will be included, and can be increased to 108") x L: 0.88" x D: 5" Cabinet legs...

An eye-catching mid-century Italian wall unit or bookcase made from gilded metal and walnut shelves that can be adapted to any setting due to its lightness and refinement. The bookcase is composed of N.5 track supports, N.16 shelves brackets, N.4 shelves length 60 cm,n.4 walnut shelves length 110 cm. Its originality lies in its ability to be assembled according to your needs (both in terms of length and shelving arrangement), even if you want you can get two divided wall units, a module with two supports and another with three supports. During the restoration, it was decided to remove the old screw holes on the shelves in order to have more options...

The Eos Shelf, designed by Giuseppe Bavuso, is an innovative wall shelving system. With a thickness of only 8 mm, the Eos design combines a lacquered glass top with a lacquered alumi...

A pretty wall unit with four shelves each covered in a faux lizard pattern paper covering. The paper has been lacquered or covered with a gloss finish. The base has been wrapped in b...

Luigi Saccardo, 'Beehive' bookcase from the 'Topline' series, lacquered laminated wood, metal, Italy, circa 1976 Back in the seventies, Topline was a newly introduced collection by ...

19th Century Regency Mahogany Lawyers Bookcase Wall Cabinet Biotech, 1811-1819 . Rare early 19th century Regency graduated lawyer’s bookcase cabinet . Tapered scale 13" depth to 17" at the base, which gives it a lot of charm and takes away the heavy look of some other bookcases. All the original hardware still intact in lions head knobs with a ring This antique library bookcase has the original glass with one cracked that we never replace . Each shelf opens upward. 4 Regular size and the shelf on top of the Two lower drawers is for larger items to be exhibited and stored away. Perfect for a library, lawyers office...

Highly versatile and functional Cado System wall unit in Brazilian rosewood by Danish designer Poul Cadovius. Wall unit can be customized with va...

Enzo Mari Dima Modular Wall Shelving System for Simon International Dima Italy, circa 1970 Enameled steel, shelves adjustable with solid plastic holders....