Aluminum Sculptures

Organic aluminum sculptural jewelry stand by American artist, Donald Drumm.

Pair of Mid Century well cast aluminum horse figures with detailed mane, tail and decorative saddle. Dimensions: 3 1/8" W x 11 3/8" Lx 9 1/2" H Condition: Please see detail photos....

Abstract outdoor or indoor sculpture by Barbara Sorensen. Made of aluminum and stainless steel. This has been outside for the last 10 years and there is no rust whatsoever. The ...

Arthur court elephant sculpture tray box MINT!.

1960s Vintage Village and Cafe Scape Wall Sculpture by Curtis Jere. Mixed Metal Village / Cafe Scene Signed C. Jere. Beautiful Cosmopolitan Village Of Eclectic Mixture Of Metals....

Monumental modernist wall sculpture created by Rafe Affleck (1928-2015). Richard R. "Rafe" Affleck created incredible sculptural metal works for private and public installations. Ref...

A very interesting American eagle sitting on driftwood log, solid cast aluminum after Don Drumm.

Raku abstract torso sculpture by master potter Tom Neugebauer, dated 1988. Sculpture (which is affixed to lacquered black base) measures: 28.75" high x 12.75" x 13", with the base having a diameter of 11.75". Aluminum pedestal...

Phyliss Mark was best known as a jewelry designer.The sculpture shows her attention to detail.Signed at the base.Sculpture has great movement when in motion.

2 Wright Royston Adzak table sculptures for Atelier A

A very cool stylized ceramic and aluminum charging bull sculpture, circa 1990s. The piece is in very good vintage condition with no visible chips or crac...

1950’s Small Cast Aluminium Sign Letter – B. Heavy quality American cast aluminium signage letter. Listing for a single letter as photographed. Other group images are included for i...

This aluminum locomotive sculpture was originally a playground spring ride located throughout parks. Spring is not included. It's more sculptural and part of Americana history. We had this locomotive sand blasted and powder coated black. Locomotive measures 29" wide, 14" deep with handles and 15" high. Stamped J.E. Burke Co, Fond Du Lac...

This is an aluminum artist made sawtooth fish bill replica mounted on a steel stand.

Stylish set of 2 postmodern aluminum candle holders. This pair has clean lines and a luminous aluminum finish. The bolt like design makes this ...

Cast aluminum puzzle bird sculpture. Depending on angle, could also be viewed as a swimmer (until one notices the tail). This piece should be placed in a location where won't be hand...

Just in this stunning Modern Abstract Red Lacquer Aluminum Table Sculpture, in the manner of Jane Manus. This sculpture is all hand welded and lacquered in a beautiful Red color. No...

Artist William Josef student of Josef Albers and Buckminster Fuller Black Mountain College N.C. Base: 10 Square

An unusual sandcast aluminum and brass sculpture by noted New York sculptor Rodger Mack. Stamped #6 of 10. A quick note about the artist: "Born in ...

Edition : /9500 It is signed and numbered in relief. A dismountable sculpture, emblematic of the Spanish self-taught artist's work, created in nickel-plated metal. Very small in si...

Jonathan Clarke Two-Piece Sand-Cast Aluminum Sculpture with Fitted Base, UK, 80s Unique two-piece sand-cast aluminum sculpture by acclaimed British artist Jonathan Clarke (b. 1961),...

Curtis Jeré 1990 metal wall sculpture. There are five curved metal layers, all made of different materials, colors and textures. The edges are curled outwards in a way that it looks ...

Abstract aluminium sculpture "Judith" No. 7306 by Jordi Bonet Signed and dated “73 Jordi” on the base; also signed and inscribed : Jordi Bonet 1/1 No. 7306 exemplaire unique on the b...

Large Mid-Century Modern Donald Drum style cast aluminum brutalist exotic African wild beast sculpture on base. Also after Bruce Fox designs. In fine cond...

20th century woven cane fabric beater from the Lega People of D. R. Congo A sculptural piece of African utilitarian ware used to beat the dust out of fabric as it would hang on a ...

Aluminum sculpture of a brogue shoe by U.K. artist Finn Stone, one from an edition of 21.

This artwork was created by the Italian artist Ottorino Tonelli. Ottorino Tonelli was born in 1948 in Carrara, where he lives and works. After having ...

This artwork was created by the Italian artist Ottorino Tonelli. Title "Romeo" . Ottorino Tonelli was born in 1948 in Carrara, where he lives and work...

Tall snow swirls by Art Flower Maker Unique piece. Dimensions: Ø 60 x H 50 cm. Materials: powder coated white shiny/matte aluminum. The artistic eye of The Art Flower Maker combined with Italian artisanal metalwork has brought to life these unique pieces which can serve as a focal point in a private domestic space as well as have tremendous visual impact in a grander setting. Every sculpture is intentionally created to be a unique piece, each with its own distinctive details. The materials from which these pieces are built by their nature have slight natural variances in tone and finish giving each sculpture special and remarkable properties. The photo depicts the correct proportion and finishing possibilities that can also be personalized upon request. Born in Sicily, Marcella Trimarchi moves to Milano in 1985 to pursue a degree in Fashion. In 1989 she is hired by Gianni Versace as a designer, working closely with Gianni until 1997. Tom Ford then brings her into his Team in 1998, prior to honing her skills further for Valentino & Moncler Gamme Rouge working with Alessandra Facchinetti who she meets at Gucci. In 2012 she moves to New York City and works for Calvin Klein Collection as VP Creative Product Development. She decides in 2018 to reconnect with her creative side. She was drawn to the bold arrangement of flowers combining her remarkable eye for beauty and her uncanny attention to details now highly refined from her work for Couture collections. Marcella is inspired to explore more enduring ways embody and embolden fresh arrangements, and reinvents herself as The Art Flower Maker, where her ephemeral creations are permanently captured through both photography and sculpture. During her daily walks in the New York City’s flower...

A French Art Deco aluminum lion sculpture. Plating in different finishes upon request. We are the rare source that has specialized in French Art Deco fo...

Sculpture Elephant polished made with aluminium Hand-crafted plates. Exceptional piece made in Welded and shaped aluminium into masterful Works of contemporary art.

"Kaskad" sculpture by Swedish Artist Folke Truedsson. Made in 1971 in Sweden. Aluminum and carrara marble. Good vintage condition with age related and patina. Signed with label on th...

Richard Tuttle (b.1941) Smell of Trees, 1990, Cast aluminum, ceramic (no light included), signed and numbered "Richard Tuttle, 10/10" on underside.

Aluminum Butterfly Sculpture By Artist Michael Gitter Offered for sale is a polished aluminum butterfly sculpture by Miami based artist Michael Gitter. This sculpture is made of tw...

This is an engaging black aluminum sculpture create by the Italian artist Patrizia Guerresi, in the 1988. The piece is a multiple of 1000 specimen on a black wooden base. The title o...

A raw and totemic abstract aluminum sculpture by Norma Flanagan. Signed on the bottom of one flat piece. A composition with two abstract jagged gray sla...

Beautiful and rare signed and dated glass sculpture by John Bingham 1976, rare piece signed and dated at the bottom on a solid aluminum base, no chips or cracks.

This artwork was created by the Italian artist Alessandro Guierriero, it is a multiple of a serie of specimens made in limited edition not numbered. The set is forged in aluminum and...

This artwork was created by the Italian artist Alessandro Guierriero, it is a multiple of a serie of specimens made in limited edition not numbered. The set is forged in aluminum and...

Discover the allure of modern minimalism with the Aluminum Sphinx sculpture by Gary Slater. This piece, boasts a sleek, reflective surface that plays with...

This artwork was created by the Italian artist Alessandro Guierriero, it is a multiple of a serie of specimens made in limited edition not numbered. The set is forged in aluminum and...

Very good vintage condition being structurally sound with age appropriate signs of normal use as pictured. Overall very nice.

Ugo La Pietra is an Italian artist, architect, designer and philosophy. Since 1960 he created the fundamental of European artistic tendancy as founder of various art groups such as Global Tool, Radical Design...

Very interesting sculpture of the imagination of a contemporary great artist Justin Beal. This series of Melons,Cucombers, Cantaloupes is exceptional .

SALE ONE WEEK ONLY "Robert Bielat was an artist’s artist, a sobriquet applied to those whose work is brilliant but idiosyncratic, deeply compelling in a way that is obvious to those who can see it, but not necessarily so to the market or to the arbiters...

Wonderful Mid-Century Modern abstract Brutalist cast aluminum sculpture dating from the 1960s. I cannot find any signatures or marks but made very well. Wonderful form and design. In...

An unusual cast bronze sculpture by Anne Van Kleeck. From the artist's estate. A note about the artist: Anne Van Kleeck was primarily known for her works in cast bronze and ceramics. She attended Ohio Wesleyan University (B.A.) and Ohio State University (M.A.) and spent several years as a professor of art in Ohio and Florida. In 1957, Anne traveled to Venice, Italy to study bronze and lost wax casting, beaten iron and mosaic techniques. During that stay she employed an Italian foundry expert and together they established a small foundry on the island of Murano where they cast bronzes for her one woman show in Venice. Van Kleecks work has won multiple awards and is owned worldwide by private collectors and museums, including the Metropolitan Museum and MOMA in New York. She was contemporaries of and exhibited with Ruth Asawa, Gary Knox Bennett...

The Brutalist Tube Vase #002 is composed of common aluminum extrusion profiles – Simple round and rectangular tubing is precisely cut, drilled, and welded specific proportions in min...

A set of fabulous aluminum two sided monumental sculptures by the renown British Sculptor Roy Rasmussen. They were identified for us by a relative of the artist as "Ida II and Maren". They are mounted to bases by posts that can be easily set into the ground where they can be mounted outdoors. As aluminum they will not rust and can withstand the weather. Both are signed and dated 71. They are 77 inches tall as pictured. The actual rectangular pieces are 66.75 inches tall. They are 22.5 inches wide and approximately 8 inches deep. In good condition with minor imperfections and age appropriate wear and tear. From the artist's Website: Born in London, England in 1919 of Anglo Danish parentage, he was the third generation of a family of craftsmen in metal. His grandfather had originally worked with metal in Denmark, but it was an uncle in the United States who had used aluminium to produce artistic sculptural forms attracting press coverage. This was the catalyst which led him to embark on studying the techniques of exploiting that medium. Early working life had exposed him to the crafting of sheet metal and different welding techniques through the car industry at Rolls Royce and then working later in the production of artificial limbs. Initially pursuing art of a representational nature with great success, his first work was completed and exhibited in 1954. A year later he presented two new works, which were then exhibited at the Aluminium Centenary Exhibition in Britain run by the Aluminium Development Association at the Royal Festival Hall and visited by H.R.H Prince Philip. Roy Rasmussen was to earn widespread recognition from this landmark beginning. A chance spell in Egypt as a young man (due to military service during the War) had exposed him to ideas and inspirations which would be nurtured and regenerated some decades later. The mysteries and splendors of Egyptian art were enveloped and symbolized into shapes and emblematic forms, and were to remain a powerful influence in many of his works, as he turned away from purely representational or figurative sculpture. From the early 196os his works were exhibited widely: from many London West End galleries to, internationally, exhibiting at shows such as the British Council at the German Industries Fair and the English Expressionists at the Galerie Creuze in Paris. He had in the late fifties joined the artist Lyall Watson who founded and opened the Woodstock Gallery, off of Bond Street in London, and worked closely with him as a director and artist of the gallery throughout its formative years. In 1967 he left the Woodstock Gallery and moved to the newly opened John Whibley Gallery on Cork Street in Mayfair where he remained as resident artist until it closed in 1977. His association with the Free Painters and Sculptors group, where he had been an early member since the 1950s, was further sealed in 1984 when he became director of their Loggia Gallery with its sculpture garden, in Buckingham Gate, Westminster. He exhibited there throughout the many years following. After his death in 2014 the Free Painters and Sculptors set up the Roy Rasmussen Award to be presented annually, 'in recognition of one of our founding members Roy Rasmussen, a revered sculptor and historian, whose years of dedication have inspired generations of FPS artists'. SELECTED LIST OF MAJOR AND NOTABLE EXHIBITIONS Aluminium Centenary Exhibition, Royal Festival Hall 1955 Society of Portrait Artists 1957 Drian Gallery Exhibition 1957 'New Vision' Denis Bowen New Vision Gallery 1957 'Painter and Sculptor Collaborate' Woodstock Gallery 1959 Inaugural Exhibition Woodstock Gallery 1959 'Symposium' Royal Institute of British Architects 1959 'Expressionistes de Londres' Galerie Raymond Creuze, Paris 1960 'Art Alive' International Collection, Northampton 1960 Maurice...

TOOOTEM Miroir Totem by STUDIO SOL LECCIA Dimensions: D 5 x H 205 cm Materials: Mirror, Aluminum and Brass. TOOOTEM's were born from the desire to create nomadic work, both strong ...

Sculpture The Kiss made with aluminium Hand-crafted plates. Edition of 8 pieces made in Welded and shaped aluminium into masterful Works of contemporary art.

Berto Lardera (1911-1989) created "the Star of Maryland" for the Eastalco aluminum factory in Frederick in 1971. In Corten steel and Aluminum, Lardera's ...

A large abstract aluminum sculpture by J.B. Thompson. Signed JBT70. Sculpted on three sides with two sides left flat so it can sit in a corner.

Abstract Brutalism D. Calvi Cast & Partially Polished Aluminum, Marble ca. 1970’s DIMENSIONS Height: 22 inches (w/ base) Width: 9.5 inches Depth: 4 inches Base: 11 x 6 x 3 inches A...

Modernist double spire cast aluminum sculpture by Aaron Betzel, inscribed on back.

A polished aluminum floor or wall sculpture of a gazelle by Arthur Court. Cast aluminum skull and antlers mounted to a base. Can be displayed as a wall sculpture as base detaches to ...

Polished aluminium and brass abstract sculpture that was a gift from the artist with an inscription on the back, Rotates on a wheel bearing.

Two-piece Sculpture by Jonathan Clarke, Sand-Cast Aluminum, UK 1980s Jonathan Clarke Sand-Cast Aluminum Ewer Form Sculpture with Fitted Base Unique two-piece sand-cast aluminum scu...

Studio aluminum and brass Truck. Reminds me of a milk truck from the 60s or a salesman sample in a car dealership. We were told an engineer that worked at Alamogordo, NM made this tr...

Vintage film real whose spindles form a star (ca. 1940s, USA). Impressive piece of Hollywood decor in an uniquely large size (42" Diameter) with good signs of age/patina (original we...